KS74C100
KS74C100 - Image 2
KS74C100 - Image 3
KS74C100 - Image 4
KS74C100 - Image 5

KS74C100

Industrial accelerometer

These piezoelectric vibration transducers were developed for use in harsh industrial conditions.

They are dust and water protected and have insulated mounting bases to avoid ground loops, which can add noise to the sensor signal, especially in the vicinity of strong power consumers.

Output

IEPE
Mass

32 g
Sensitivity

100 mV/g
Measuring range

600 m/s²
Lower frequency limit (3 dB)

0.13 Hz
Upper frequency limit (3 dB)

16 kHz
Connection

TNC, axial
Mounting

M5 thread (female)
Working temperature range

-30 .. 120 °C

KS74C100 : without accessories

  • Sensor with calibration data sheet
  • 2 years warranty
  • Case

KS74C100 /01: with accessories kit

  • Sensor with calibration data sheet
  • 010-TNC-BNC-1,5: Low-noise cable; 1,5 m; 120 °C; Ø2,7
  • 008: Rare-earth magnetic base; M5; Ø22; 120 °C
  • 001: Sensor probe tip; M5
  • 003: Stud bolt; M5 x 8
  • 002: Adhesive wax
  • 2 years warranty
  • Case

PLEASE NOTE:

Calibration data sheets are not accredited reports and are therefore not covered by EA MLA (EA Multilateral Agreement)!

Downloads

Accessories for this product

  • 001

    Hand-held probe M5 (male)

  • 003

    Stud bolt M5 x 8

  • 008

    Rare-earth magnetic base, M5 (male)

  • 010-TNC-BNC-1,5

    Low-noise cable TNC / BNC; 1.5 m

  • 029

    Adhesive pad, insulating, M5 (male)

  • 030

    Triaxial mounting cube 3 x M5

  • 045

    Stud adapter M5 (male) / UNF 10-32 (male)

  • 046

    Stud adapter M5 (male) / 1/4″-28 (male)
    • Load more

    Related products

    KS74C100 KS74C10 KS84B10 KS84B100 KS84B500
    Output IEPE IEPE IEPE IEPE IEPE
    Mass 32 g 28.5 g 58 g 61 g 61 g
    Sensitivity 100 mV/g 10 mV/g 10 mV/g 100 mV/g 500 mV/g
    Measuring range 600 m/s² 6000 m/s² 6000 m/s² 600 m/s² 110 m/s²
    Lower frequency limit (3 dB) 0.13 Hz 0.12 Hz 0.2 Hz 0.2 Hz 0.3 Hz
    Upper frequency limit (3 dB) 16 kHz 21 kHz 23 kHz 20 kHz 20 kHz
    Connection TNC, axial TNC, axial Binder 713 (M12) Binder 713 (M12) Binder 713 (M12)
    Mounting M5 thread (female) M5 thread (female) M8 thread (female) M8 thread (female) M8 thread (female)
    Working temperature range -30 .. 120 °C -30 .. 130 °C -40 .. 120 °C -40 .. 120 °C -40 .. 120 °C
    Channel number - uniaxial - - -
    IP codes - IP64 - - -