KS74C10

Industrial Accelerometer

These piezoelectric vibration transducers were developed for use in harsh industrial conditions.

They are dust and water protected and have insulated mounting bases to avoid ground loops, which can add noise to the sensor signal, especially in the vicinity of strong power consumers.

Output

IEPE

Axes

uniaxial

Mass

28.5 g

Sensitivity

10 mV/g

Measuring range

6000 m/s²

Lower frequency limit (3 dB)

0.12 Hz

Upper frequency limit (3 dB)

21 kHz

Broadband Resolution (rms)

2 mg

Connection

TNC, axial

Mounting

M5 thread (female)

Protection

isolated, IP64

Working temperature range

-30 .. 130 °C

KS74C10 : without accessories

  • Sensor with calibration data sheet
  • 2 years warranty
  • Case

KS74C10 /01: with accessories kit

  • Sensor with calibration data sheet
  • 010-TNC-BNC-1,5: Low-noise cable; 1,5 m; 120 °C; Ø2,7
  • 008: Rare-earth magnetic base; M5; Ø22; 120 °C
  • 001: Sensor probe tip; M5
  • 003: Stud bolt; M5 x 8
  • 002: Adhesive wax
  • 2 years warranty
  • Case

PLEASE NOTE:

Calibration data sheets are not accredited reports and are therefore not covered by EA MLA (EA Multilateral Agreement)!

Downloads

Accessories for this product

Related products